An optimal configuration for hybrid SOFC,gas turbine,and Proton Exchange Membrane Electrolyzer using a developed Aquila Optimizer

In this research, a technical, economic and environmental analysis has been proposed to a Hybrid Solid Oxide Fuel Cell (SOFC) system-based hybrid system including biomass, gas turbine, and Proton Exchange Membrane Electrolyzer. A multi-objective optimization technique has been utilized to improve the overall product cost and the exergy effectiveness based on a developed version of Aquila Optimizer (DAO). The main idea of using the developed version is to improve the accuracy and the precision of the original Aquila optimizer. The system is then authenticated in terms of energy/exergy effectiveness, and energy-economic efficiency. The achievements indicate that employing the optimization algorithm for different configurations provided satisfying results for the system.     

Integrated LaB6/g-C3N4 solar absorber for solving dye accumulation during solar steam generation

Solar steam generation has attracted considerable interest due to its easy accessibility and sustainability. However, dye molecules were gradually concentrated on bulk water or the surface of solar absorbers during the disposal of dye wastewater. Herein, LaB₆/g-C₃N₄ composites were immobilized on porous cotton cloth, served as a solar absorber resistant to dye clogging. The optimal solar absorber possessed solar harvesting of 92.3% and showed great application potential in the field of the treatment of dye wastewater. This study presented a new approach for the treatment of dye wastewater.     

Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

海上稠油油田蒸汽吞吐产量确定新方法

针对目前蒸汽吞吐产量预测模型假设条件简单、普适性差等问题,一般采用测试法和类比法综合确定海上稠油油田蒸汽吞吐初期产量。由于目前海上油田通常只开展常规测试,无法直接获得热采开发初期产量。笔者提出海上稠油油田蒸汽吞吐初期产量确定新方法,建立蒸汽吞吐相对于常规开发的初期产量倍数预测模型,通过蒸汽吞吐产量倍数,将常规测试确定的产量转化为蒸汽吞吐产量。研究表明,蒸汽吞吐初期产量倍数主要受储集层渗透率、原油黏度、注入强度、蒸汽干度等因素影响,利用正交试验设计和多元回归等方法,建立海上稠油油田蒸汽吞吐初期产量倍数与油藏地质参数及注入参数之间的非线性预测模型,该模型经实际生产数据验证,预测误差小于5%,可靠性高,能够为海上稠油油田蒸汽吞吐初期产量的确定提供依据。     

储能水管-冲击式水轮机发电系统设计及发电效益分析

为充分利用高层建筑物内部的水能包括生活污水及高层建筑物顶楼雨水,可将其转化为电能。由此设计的储能水管-冲击式水轮机装置即通过冲击式水轮机和发电机将高层建筑物内部储存的生活污水及雨水的势能转变为可供使用的电能,并通过建立单户用水模拟模型,设置储能水管对30、100层建筑进行发电模拟。模拟结果表明,储能水管-冲击式水轮机发电具有很好的发电效益和节能减排社会效益,获得了日发电过程中冲击式水轮机的水头变换和启停特性,为该系统中冲击式水轮机的个性设计提供了依据。     

气动弹片对垂直轴风力机性能影响研究

片对垂直轴风力机气动性能的影响并分析了其流动机理。结果表明：气动弹片在高尖速比下可显著抑制流动分离并改善其动态失速特性，功率系数得到极大提升；切向力和转矩系数在气动弹片作用相位角范围内，均有一定提高，而在其它相位角内，风力机性能不受影响。     

中压进汽腔的流场数值模拟比较

通过数值模拟计算,对中压对称进汽和切向进汽两种结构的流场进行了分析比较,结果表明,单一切向进汽腔的总压损失更小,出口汽流角的周向分布均匀度更好。更进一步,为整体评估中压进汽腔的流场以及对叶片级的流动影响,对中压进汽腔及第1级叶片的整体流体域流场情况进行了分析比较,结果表明,采用大几何角静叶的切向进汽腔气动性能最优;当采取切向进汽腔时,需合理选择第1级静叶几何角并耦合计算,才能实现进汽腔的气动优化。     

浅析火力发电厂汽水系统中内径管与外径管的设计选择

按照管道加工工艺的不同,管道可分为内径控制管和外径控制管。通过热轧工艺生产的外径控制无缝钢管,可满足火力发电厂汽水系统中绝大部分管道的使用要求。对于超(超)临界机组的主蒸汽和高温再热蒸汽管道采用的P91/P92材质的大口径厚壁无缝钢管,由于对材料性能和加工工艺有特殊要求,因此宜采用内径控制管。     

Numerical study of a concept for major repair and replacement of offshore wind turbine blades

Repair and replacement of offshore wind turbine blades are necessary for current and future offshore wind turbines. To date, repair activities are often conducted using huge jack‐up crane vessels and by applying a reverse installation procedure. Because of the high costs associated with installation and removal of offshore wind turbine components and the low profit margin of the offshore wind industry, alternative methods for installation and removal are needed. This paper introduces a novel concept for replacement or installation of offshore wind turbine blades. The concept involves a medium‐sized jack‐up crane vessel and a tower climbing mechanism. This mechanism provides a stable platform for clamping, lowering, and lifting of a blade. A case study of a 5‐MW offshore wind turbine is shown, where common engineering practices were applied and numerical simulations of the marine operations were carried out using finite element and multibody simulation tools. Operational limits for wave and wind actions were established to demonstrate the technical feasibility of the proposed concept.     

多泥沙河流水电站水轮机转轮内部流动数值模拟

针对多泥沙水电站水轮机转轮的泥沙磨损问题,以HLA351-LJ-275水轮机为模型,对水轮机在设计工况下,运用N-S方程和标准κ-ε湍流模型,利用CFX求解器进行仿真流动模拟。水轮机转轮进口沿叶高20%、50%、80%流面的压力、泥沙速度及泥沙体积分数分布的数值结果表明,水轮机转轮叶片工作面压力大于背面且最小压力高于气化压力。泥沙速度在叶片进水边和出水口位置普遍较高。水轮机转轮叶片工作面的泥沙体积分数大于背面,叶片工作面的泥沙体积分数在叶片出水口普遍较高,叶片背面的泥沙体积分数在叶片进水边普遍较高。研究结果对多泥沙河流水轮机转轮叶片的泥沙磨损评估及维修具有指导意义。